Skipdash™ Pavement Marking Paint is a modified latex emulsion of superior quality and toughness offered in bulk skid pricing. This bulk pallet can provide you with a paint that is used in many states meeting federal specs but perfect fast dry for contractors or municipal lots. It can be used on parking lots, traffic islands, walkways, aisles, fire lanes, safety areas, roadways, handicap areas, tennis courts, and playgrounds. You can extend the life of painted arrows and crosswalks or other by adding glass beads.
- Good for asphalt zone marking projects (latex fast dry)
- Qty 24 - 5 gallon pails to a full skid or pallet of our marking paint
- Modified latex emulsion line paint great for parking lots and roadways
- Superior toughness meets fed specs
- Perfect for use with Titan PowrLiner 2850 Paint Striping Machine
Surface Preparation: Surface should be clean and free from dirt, dust, debris, and oil. Etching Concrete surfaces is advised prior to use. Do not stripe when pavement is wet or rain if forecast soon after. Skipdash Asphalt Line Marking Paint should be applied when temperatures are above 50 degrees.
Application: Mix well before use and if applied by spray it is best to strain the paint and you may also dilute slightly with water if needed. Brush or roll on as is. This paint formula will dry under normal conditions in about 30 minutes. If areas of painting are shaded or in cooler temperatures longer drying times may be required. Normal conditions may require 4 to 6 hours of drying time for no traffic pick-up.
Coverage: 400 to 500 linear feet of 4” stripe per gallon, 800 to 900 linear feet of 2” stripe per gallon, 250 to 300 linear feet of 6” stripe per gallon.
CAUTION: KEEP FROM FREEZING. Do not stripe when rain is in forecast, on wet surfaces, or when temperature is below 45°F. Wash tools in water. Use a suitable paint thinner if material has dried. Do not store in direct sunlight. Container should be closed when not in use. Because of alkali inherent in concrete surfaces there is no product guarantee on these. Keep out of the reach of children.
Packaging: 5 gallon pails, 55 gallon drums and 275 gallon tote tanks.
User friendly, complies with all V.O.C. emissions and E.P.A. standards.
MATERIAL SPECIFICATIONS: REQUIREMENTS:
Weight per gallon, ASTM D1010 (lbs) 13.30 – 14.00
Viscosity @ 77°F, ASTM D562 (Kreb’s Stormer Unit) for ambient application 75 – 80 KU
for heat application 85 – 100 KU
% Weight solids 74.00 ± 2.00
% Volume solids 58.00 ± 2.00
Dry Time (15 mil. – wet) @ 77°F & 50% R.H. Dry to no pick-up 10 – 15 min
VOC, grams/liter 150
Dry opacity, White & colors 0.92
Fineness of dispersion, Hegman 3.0
Directional reflectance of white paint, % 85
Bleeding ratio 0.95
Safety Data Sheets (SDS) -Click on links below to view PDF:
Product Info Sheet (INFO) - Click on the link below to view PDF:
| Product | Weight |
|---|---|
| White Pavement Marking Paint Full Pallet - Qty 24 | 1749.0 lb |
| Yellow Pavement Marking Paint Full Pallet - Qty 24 | 1689.0 lb |
| Black Pavement Marking Paint Full Pallet - Qty 24 | 1709.0 lb |
| Red Pavement Marking Paint Full Pallet - Qty 24 | 1730.0 lb |
| Blue Pavement Marking Paint Full Pallet - Qty 24 | 1778.0 lb |
Add item(s) to your cart, then calculate shipping cost below: